With digital show(1-32, 91-97) on the panel. Support anti-decode
with remote control. Digital LED Defense zone display. Users can
know which defense zone is triggered. 32 wireless defense zone
display (1 to 32) and 7 wired defense zone display (91-97). Every
defense zone can set independently arm, disarm, delay alarm and so
on. Have the function of “one-key arm”. User can start “Home arm”
or “Out arm” freely by keeping pressing one key on remote control
Can set the reminder sound of defense zones. Will remind users of
remembering arm the alarm system when going out. It stores 3 groups
of monitoring center and 6 groups of user phone numbers to dial out
and play the recorded message if there is an alarm. Can arm/disarm
with remote control or keypad on the control panel Can
arm/disarm/listen-in by calling the host phone number (The phone
numbers of control panel). Have the function of reminder for
circuitry failure. For example, if telephone line is cut or short,
the control panel will alarm. Have in-built backup battery and can
continue to work and last for 24 hours when electricity is cut or
in failure. With international Ademco Contact ID,can work with the
monitoring center.
Technical Parameters ：
Power supply：AC 220V DC 9V nner Power: Ni-Mh battery, DC=7.2V
Static Current：≤50mA Alarm Current：≤300mA Wireless Frequency:
315/433MHz±0.5MHz Wireless Receiving Sensitivity：5mV/ m Outer Alarm
Siren Volume：110db Working Condition：Temperature-10℃～40℃
Humidity：≤90% Capacity for Wireless Device：99pcs Wire Device：7pcs
Weight: 1.2Kg/set
Size : 160*110*35 mm
Standard pack components
1 alarm host, 1 wireless infrared (motion) detector,1 wireless door
magnetic detector,1 siren,2 remote controllers,1 power supply,1
manual
